There was a time when shower curtains were all the rage because they were such an easy way to prevent water from splashing all over the bathroom floor. Because it is so much more efficient, the fixed panel shower screen is the one that is most often used these days. In addition to being easier to clean, they help retain water, making drainage faster and more efficient. In addition, they add to the resale value of your property. A wide variety of other shower screens are also available to accommodate any area and meet the demands of each customer.
There are a few things to keep in mind if you’ve recently bought a new shower screen or are contemplating doing so.
Is It Possible to Install a Fixed Panel Shower Screen on Your Own Without Professional Help?
An easy-to-install glass shower screen may be created with frosted, transparent, or tinted glass, depending on your preference. If you want to save money, you may hire a contractor to do the task for you, but if you prefer to do it yourself, follow this advice.
You’ll Need These Items to Install a Fixed Panel Shower Screen:
- A drill powered by an electric motor
- Spirit level
- The gun for applying sealant
- Wall plugs
- Measurement tape
- Multi-purpose detector
A Step-by-Step Guide on Installing a Fixed Panel Shower Screen
To help you get started, here’s a step-by-step guide to installing a Fixed Panel Shower Screen.
Step 1: Get Yourself and the Area Ready First
Before installing the shower screen, you’ll need to make sure your equipment and area are ready, including removing the old one to make room for the new one. To protect the floor of the restroom if anything heavy is dropped on it, cardboard or another similar material should be placed there.
After you have unpacked the shower screen, check to see that it is the correct one and that it is in good condition. Put it in a location that is a good distance away from the work area to reduce the risk of accidentally breaking it while you are installing it. Instructions for a particular installation method are included in the packaging for fixed panel shower screens. Consult the user guide that came with your shower screen to find out whether any special installation instructions need to be followed. Please continue to the next step only if you have completed all of the necessary steps.
Step 2: Measure the wall channel and cut it to size
The glass panel is held in place by a steel channel installed in the wall’s vertical direction. As a result, you have to place this component before installing the Fixed Panel Shower Screen Before you install the channel, determine where it will be positioned on the wall. A spirit level should be used to properly place the track and ensure that it is running in a straight line. Using a level and a pencil, mark the spots where you’ll be drilling the screws.
To prevent drilling holes in the incorrect places, you need to make sure your markings are exact.
Step 3: Drill the Screw Holes
Check the area around the drill site for any electrical wires or pipelines using a detector that serves many purposes before beginning the drilling process. It is important not to drill into any of your water lines since this might result in water leaks. When drilling, it is essential to utilize the appropriate drill bit in accordance with the surface that you are drilling into.
Locate the spots that have been designated, and using the electric drill, begin drilling the holes for the screws. When you are finished, you should insert the wall plugs into the holes that were drilled into the walls. Before you start drilling, cover the designated locations with masking tape. There is no risk that it may slide while drilling holes because of this method’s design.
Step 4: Mount the brackets or channels to the wall
Use the mounting hardware to screw the brackets or channels to the wall. Ensure that the bracket is standing straight up. Channels, on the other hand, are longer and provide more support than brackets do. As a result, they are more effective than brackets. In comparison to brackets, they also have a more visually beautiful design. The materials are more durable and can withstand the elements.
Just before you tighten down the bracket or channel, dab it with a little bit of silicone adhesive to protect the metal. Before moving on to the next stage, give it some time to dry.
Step 5: Install the Glass Panel
You’ll have to deal with a panel or panels while installing a shower screen. As a result of this, you’ll need to secure the panels one at a time and in the appropriate way. Before you begin installing the panels, you must review the installation instructions provided by the manufacturer one more time. In addition, some shower screens are packaged with their unique fasteners to secure them in place.
Make sure you have an additional set of hands-on boards to adjust and place the shower screen while it’s being secured to the wall. It’s the perfect moment to double-check that the glass panels are watertight and to attach the support bar if one is included.
Step 6: Seal the Edges
Make sure there is no water coming out of your shower by sealing and waterproofing all the edges of your fixed panel shower screen. It is recommended to make use of a sealant gun to apply a bead of silicone around the margins of the shower screen where it meets the wall. Wait at least 24 hours for the sealant to harden. Your shower screen will be ready to use when this time has passed.